Couplings
RANGE OF HOSE COUPLINGS
SHARDA INDUSTRIAL CORPORATION offers a complete range of fittings for their hoses. Many of them are specified in the list of this guide, but virtually and type, for any use application can be supplied after consulting with our technical department. Adaptors, accessories, such as blank caps, dust plugs and delivery / filling nozzles are available.
MATERIALS
All the hose fittings may be obtained in a variety of materials according to the compatibility with various media, including Stainless Steel, Brass, Aluminum, Carbon steel, Polypropylene, PTFE, and for special application, metal fittings can be coated with special PTFE coating.
METHOD OF ATTACHMENT
hoses are generally supplied with factory end connections to customer
requirements, from our factory. All metal components, including end
fitting, are electrically bonded to give full end to end electrical
continuity. On Specific request, electrically discontinuous hose
assemblies can be provided. For all type of end fitting that enters the
hoses and forms the mean by which the fittings is connected to the hose,
is provided with scroll on the surface, that correspond to the pitch of
the internal helix wire of the hose. Then, the end fittings will be
attached to the hose by the use of a special designed lip seal, made
from elastomeric materials depending on the chemical resistance to the
product conveyed, and a material from elastomeric materials depending on
the chemical resistance to the product conveyed, and an metal ferrule
which can be externally swaged or crimped. This system guarantees a
great safety to the complete assembly.
| Type | Picture | Size | Material |
| MALE THREADED ROUND Bspp (parallel thread) the face Bspt (tapered thread) flat face Bspp Cone Seat (60°) NPT |
 |
¾” upto 6″ | Stainless Steel 304 / 316 L Brass Aluminum Carbon Steel Polyproplene PTFE Coated |
| SWIVEL NUT ROUND Pin lug female threaded Bspp (parallel thread) flat face Bspp Cone Seat (60°) NPT |
 |
1½” upto 4″ | Stainless Steel 304 / 316 L Brass Carbon Steel |
| SWIVEL NUT HEXAGONAL Female threaded Bspp (parallel thread) flat face Bspp Cone Seat (60°) NPT |
 |
¾” upto 3″ | Stainless Steel 304 / 316 L Brass Carbon Steel |
| FIXED FLANGE UNI/DIN – PN6/10/25/40 ANSI / ASA – 150 / 300# |
 |
¾” upto 10″ | Stainless Steel 304 / 316 L Carbon Steel |
| FLOATING (SWIVEL) FLANGE UNI/DIN – PN6/10/25/40 ANSI / ASA – 150 / 300# |
 |
¾” upto 10″ | Stainless Steel 304 / 316 L Carbon Steel S. S. Stub end + C. S. Flange S. S. Stub end + S. S. 304 / 316 L Flange Stub end + S. S. 304 / 316 L Flange |
| CAMLOCK MALE |  |
¾” upto 6″ | Stainless Steel 304 / 316 L Carbon Steel Aluminum Brass |
| CAMLOCK FEMALE |  |
¾” upto 6″ | Stainless Steel 304 / 316 L Carbon Steel Aluminum Brass |
| TAFTED FITTINGS |  |
1″ upto 10″ | Stainless Steel Slub and Coated with PTFE with S. S. 304 / 316 / Carbon Steel floating flange |